First unread post5 posts Page 1 of 1
Unread postby lupipiatpompeii » 15 May 2019 00:53
How to setup , close the software after play?
Unread postby Dreamer » 15 May 2019 05:51
Right click > Misc > When playback finished > "Exit PotPlayer when playlist ends".

...or "Exit PotPlayer when playback ends".
Unread postby lupipiatpompeii » 16 May 2019 13:32
Dreamer wrote:Right click > Misc > When playback finished > "Exit PotPlayer when playlist ends".

...or "Exit PotPlayer when playback ends".

how to do this in command line?
Unread postby Dreamer » 17 May 2019 00:19
I don't think it's possible, why do you need it?

I think you can assign a hotkey for this action.

Anyway, if you enable this option, it will always exit PotPlayer when playlist ends, so if you open any file, PP exit after playing and if you open whole folder, or multiple files, PP exit after playing all files.
Unread postby 黑強lg » 30 Aug 2019 13:14
開發者您好:

非常感謝您製作出如此優秀幾近完美的軟體,在此類軟體中絕對是 No.1 的。

長久使用下來,稍感不便之處有二點,請考量是否能夠予以施作,列示如下:感謝您~

1.在偏好設定—基本項目中,能否新增一個子項[播放完成時關閉主程式]。
因為是要在影像檔案播放完畢後自動關閉PP主程式,而無須每次都要手動關閉。
其另有一個子項為[關閉時還原為預設大小]這項所關閉的其實只是將檔案關閉而非關閉PP主程式。

2.在偏好設定—基本項目中,有二子項分別為[將設定儲存到 INI 檔案]與[暫停時儲存設定],而在偏好設定表單畫面之下,[初始化]按鍵右側亦有[匯出目前設定為...]可是卻沒有將 INI 檔還原的方式,以至於每次Setup軟體後都要再花一段時間重做參數的設定及其必要的修正。

至於偏好設定表單畫面之下,[初始化]按鍵是一定要保留的,因其是恢復軟體的內部原始參數設定,亦是軟體在執行上最佳化與順暢的保證。
First unread post5 posts Page 1 of 1

Login

Who is online

Users browsing this forum: No registered users and 0 guests